Which four are features of the NBX Analog Line Card? (Choose four.)

• A. When a port is mapped to multiple telephones, by default incoming calls will ring at the lowest extension first, then to the next extension, until the call is answered
• B. An NBX chassis supports only one Analog Line card at a time
• C. Its Power Failure Jack provides access to the telephone CO in case of a power failure
• D. In PBX System Mode, CO lines are pooled and allocated by the Call Processor for use by any phone for outbound calls
• E. In Key System Mode, CO lines can be mapped to one or more telephones
• F. Can use the Auto Discover function to find newly installed Analog Line Cards
• G. In Hybrid Mode, incoming calls go to Auto Attendant only and CO lines are pooled and allocated by the Call Processor for use by any phone on the system

How does the NBX administrator get both internal and external calls to use Timed Routes?

• A. Create the necessary entries in both the Internal and External Dial Plan tables
• B. The Dial Plan has an inbound and outbound section where the specific Timed Routes are coded
• C. Create the necessary entries in the Dial Plan using the keywords "inbound" and
  "outbound" to specify call direction
• D. Create the necessary entries in both the Internal and Incoming Dial Plan tables
• E. The Dial Plan does not support alternate routes for inbound calls

Which three are features of the NBX Pretranslator function? (Choose three.)

• A. Each Pretranslation is used for both incoming and outgoing traffic
• B. Outbound Pretranslation is associated with the Dialed Number Identification Service (DNIS) supported by the Digital Line Card
• C. Inbound Pretranslation is associated with the Dialed Number Identification Service (DNIS) or Direct Inward Dial (DID) supported by the Digital Line Card
• D. A single outbound or inbound Pretranslation definition contains all the required translations defined in order from lowest-to-highest extension
• E. Pretranslation is not available on Analog Line Cards
• F. Each Pretranslation is used for either incoming or outgoing traffic

Which four are features/requirements of the NBX Desktop Call Assistant (DCA) application? (Choose four.)

• A. Provides personal inbound/outbound call logs with caller ID information
• B. Users can manage all their calls from a single on-screen computer interface, for example, call transfer, conferencing, call park
• C. Uses Microsoft's Telephone Applications Program Interface (TAPI) to manage calls
• D. Supports point and click dialing to any phone in the user's directory
• E. Requires Microsoft Windows 2000 or Windows XP
• F. Requires one 3Com SKU and license per NBX system
• G. Computer with NBXTSP software must have a physical connection to an NBX phone

What does the term "Hop On" refer to concerning an NBX system?

• A. Ability to transfer incoming callers from one NBX site to another NBX site, as long as a WAN link exists between the two locations
• B. Ability of multiple users to join a conference call between NBX users
• C. Ability to use existing PSTN lines attached to one NBX from a remote NBX user, as long as a WAN link exists between the two locations
• D. Ability of a user to switch between calls using the flash key